Support Industrielle sensorer
Support Explosion Protection
Industrielle sensorer

Sensor module, interface DoorScan Interface Set

DoorScan Interface Set
  • Sensor module for configurable DoorScan® presence sensor
  • Multi-function interface with full operation
  • Complete system supply for the entire system for one door
  • Can also be used to supply the emitter and receiver modules with power
  • Single button commissioning with automatic Teach-in function
  • SIL 2, certified in accordance with DIN 18650/EN 16005
  • Tool-free module mounting using snap-in mechanism
  • Door transition cable to connect the sensor to the controller

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Uddrag af datablad: Tekniske data for   DoorScan Interface Set

Produkt beskrivelse
Replacement/extension sensor module for installation in the DoorScan® and TopScan sensor profile, multifunction interface module with door transition cable
General specifications
Operating modeBackground evaluation
Functional safety related parameters
Safety Integrity Level (SIL)SIL 2
Performance level (PL)PL d
CategoryCat. 2
MTTFd2716 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)90 %
Indicators/operating means
Function indicatorInterface: Red LED: detection, excess gain, fault code
Yellow LED: teach status
Green LED: blank status
Green LED: DIP switch status
Electrical specifications
Operating voltage24 V DC +/- 20 %
No-load supply current30 mA
Input
Test inputHigh active at U = 15 V DC to 30 V DC
Low active at U = < 2 V DC
Control inputStandby active at U = 11 V DC at 30 V DC
Output
Switching typeHinge edge light on
Leading edge light on/dark on, switchable
Signal outputNPN , short-circuit protected
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA
Response time≤ 52 ms
≤ 200 ms in boost operating mode
Conformity
Functional safetyISO 13849-1 ; EN 61508 part1-4
Product standardEN 12978
Approvals and certificates
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-30 ... 60 °C (-22 ... 140 °F)
Mechanical specifications
Mounting heightmax. 3500 mm
Degree of protectionIP54 (when mounted)
Connectionplug strip , 6-pin
Cable: screw terminal , 6-pin
MaterialCable sheathing: polyamide PA 6, black , Wall bracket: ABS
CablePUR, gray, 6-wire
Sheath diameterapprox. 4.8 mm
Bending radiusmin. 48 mm
Length5000 mm
Massapprox. 140 g
Dimensions
Height24 mm
Depth31 mm
Length126 mm
General information
Scope of deliverySensor module, interface , Wall bracket , Screw kit , cord grip , cable , Cable sheathing , Hollow rivet
Suitable series
SeriesDoorScan®

Classifications

SystemClasscode
ECLASS 13.027270913
ECLASS 12.027270913
ECLASS 11.027270913
ECLASS 10.0.127270913
ECLASS 9.027270913
ECLASS 8.027270913
ECLASS 5.127270903
ETIM 9.0EC002550
ETIM 8.0EC002550
ETIM 7.0EC002550
ETIM 6.0EC002550
ETIM 5.0EC001821
UNSPSC 12.139121528

Details: DoorScan Interface Set

Datasheet: DoorScan Interface Set

DatasheetFil typeFil størrelse
Datasheet DoorScan Interface SetPDF553 KB
Fiche de données DoorScan Interface SetPDF1606 KB
Datenblatt DoorScan Interface SetPDF543 KB
Scheda tecnica DoorScan Interface SetPDF585 KB
Hoja de datos DoorScan Interface SetPDF589 KB

Approvals+Certificates: DoorScan Interface Set

CertificatesFil typeFil størrelse
EU TUV Nord EC-Type Exam. Certificate Functional SafetyPDF89 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)PDF480 KB

Tilhørende produkter: DoorScan Interface Set

Accessories
Connecting cable between hinge side and leading edge side, Connection to interface module, Operating voltage: max. 300 V, Connection: 2 x plug-in terminalfa
Connecting cable for sensor modules, Serves as the internal bus connection for module communication, Ribbon cable, Up to 5 sensor modules can be connected, Operating voltage: max. 50 V, Connection: 5 x plug-in terminal, 8-pinfa
Generelle bemærkninger vedr. produktoplysninger fra Pepperl+Fuchs

Pepperl+Fuchs A/S
Kirkebjerg Allé 90
DK-2605 Brøndby
Denmark
info@dk.pepperl-fuchs.com
phone +45 7010 4210

© 2024 Alle rettigheder forbeholdt.

Pepperl+Fuchs er markedsledende indenfor udvikling og fabrikation af elektroniske sensorer og komponenter til det globale automatiseringsmarked. Kontinuerlig innovation, kombineret med høj kvalitet og stabil vækst har sikret uafbrudt succes gennem mere end 70 år. Pepperl+Fuchs har 6.300 ansatte på verdensplan og har produktionsfaciliteter i Tyskland, USA, Singapore, Ungarn, Indonesien og Vietnam; de fleste ISO 9001 certificerede.