Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Hent hele databladet som PDF:
Uddrag af datablad: Tekniske data for
VBG-PB-K20-DMD
Produkt beskrivelse |
PROFIBUS Gateway, double master for 2 AS-Interface networks |
General specifications |
AS-Interface specification | V3.0 |
PLC-Functionality | activateable |
Duplicate address detection | from AS-Interface slaves |
Earth fault detection | integrated |
EMC monitoring | integrated |
Diagnostics function | Extended function via display |
UL File Number | E223772 |
Functional safety related parameters |
MTTFd | 80 a at 30 °C |
Indicators/operating means |
Display | Illuminated graphical LC display for addressing and error messages |
LED PROFIBUS | PROFIBUS master detected; LED green |
LED AS-i ACTIVE | AS-Interface operation normal; LED green |
LED CONFIG ERR | configuration error; LED red |
LED PRG ENABLE | autom. programming; LED green |
LED POWER | voltage ON; LED green |
LED PRJ MODE | projecting mode active; LED yellow |
LED U AS-i | AS-Interface voltage; LED green |
Switch SET | Selection and setting of a slave address |
OK button | Mode selection traditional-graphical/confirmation |
Button MODE | Mode selection PRJ-operation/save configuration/cursor |
ESC button | Mode selection traditional-graphical/cancel |
Electrical specifications |
Insulation voltage | ≥ 500 V |
Rated operating voltage | from AS-Interface |
Rated operating current | approx. 200 mA from AS-Interface circuit 1 approx. 70 mA from AS-Interface segment 2 |
Interface 1 |
Interface type | RS-485 |
Protocol | PROFIBUS DP V1 |
Transfer rate | 9.6 kBit/s / 12 MBit/s , Automatic baud rate detection |
Interface 2 |
Interface type | RS 232, serial Diagnostic Interface |
Transfer rate | 19,2 kBit/s |
Connection |
PROFIBUS | Sub-D interface |
AS-Interface | spring terminals, removable |
Directive conformity |
Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 62026-2:2013 |
Standard conformity |
Electromagnetic compatibility | EN 61326:2003 |
Degree of protection | EN 60529:2000 |
AS-Interface | EN 62026-2:2013 |
Ambient conditions |
Ambient temperature | 0 ... 55 °C (32 ... 131 °F) |
Storage temperature | -15 ... 75 °C (5 ... 167 °F) |
Mechanical specifications |
Degree of protection | IP20 |
Mass | 420 g |
Dimensions | |
| Height | 120 mm |
| Width | 75 mm |
| Length | 76 mm |
Construction type | Low profile housing , Stainless steel |
Classifications
System | Classcode |
ECLASS 13.0 | 27242607 |
ECLASS 12.0 | 27242607 |
ECLASS 11.0 | 27242607 |
ECLASS 10.0.1 | 27242607 |
ECLASS 9.0 | 27242607 |
ECLASS 8.0 | 27242607 |
ECLASS 5.1 | 27242607 |
ETIM 9.0 | EC001603 |
ETIM 8.0 | EC001603 |
ETIM 7.0 | EC001603 |
ETIM 6.0 | EC001603 |
ETIM 5.0 | EC001603 |
UNSPSC 12.1 | 39121535 |
Details:
VBG-PB-K20-DMD
Product Documentation:
VBG-PB-K20-DMD
Design / Simulation:
VBG-PB-K20-DMD
Approvals:
VBG-PB-K20-DMD
Tilhørende produkter:
VBG-PB-K20-DMD
Accessories |
|
|
|
Full version of the AS-I Control Tools including connection cablefa |
|
|
|
|
PROFIBUS master simulatorfa |
|
|
|
|
Interface converter USB/RS 232fa |
|
|
|
|
PROFIBUS Sub-D Connector with switchable terminal resistancefa |
|