Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Hent hele databladet som PDF:
Uddrag af datablad: Tekniske data for
INX360D-F99-I2E2-V15-Ex
General specifications |
Type | Inclination sensor, 1-axis |
Measurement range | 0 ... 360 ° |
Absolute accuracy | ≤ ± 0.5 ° |
Response delay | ≤ 20 ms |
Resolution | ≤ 0.1 ° |
Repeat accuracy | ≤ ± 0.1 ° |
Temperature influence | ≤ 0.027 °/K |
Functional safety related parameters |
MTTFd | 300 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Indicators/operating means |
Operation indicator | LED, green |
Teach-in indicator | 2 LEDs yellow (switching status), flashing |
Button | 2 push-buttons ( Switch points programming , Evaluation range programming ) |
Switching state | 2 yellow LEDs: Switching status (each output) |
Electrical specifications |
Operating voltage | 10 ... 30 V DC |
No-load supply current | ≤ 25 mA |
Time delay before availability | ≤ 200 ms |
Switching output |
Output type | 2 switch outputs PNP, NO , reverse polarity protected , short-circuit protected |
Operating current | ≤ 100 mA |
Voltage drop | ≤ 3 V |
Analog output |
Output type | 1 current output 4 ... 20 mA |
Load resistor | 0 ... 200 Ω at UB = 10 ... 18 V 0 ... 500 Ω at UB = 18 ... 30 V |
Compliance with standards and directives |
Standard conformity | |
| Shock and impact resistance | 100 g according to DIN EN 60068-2-27 |
| Standards | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
Approvals and certificates |
IECEx approval | IECEx INE 14.0029X |
ATEX approval | INERIS 14 ATEX 0022X Device type: EJB4A.D.CP-INX360D-F99-I2E2 |
| Marking | II 2 GD Ex db IIB+H2 T6 Gb, II 2 GD Ex tb IIIC T85 °C Db |
E1 Type approval | 10R-04 |
Ambient conditions |
Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) |
Storage temperature | -40 ... 60 °C (-40 ... 140 °F) |
Mechanical specifications |
Connection type | Connection terminals, max. conductor cross-section 2.5 mm2 |
Conductor cross section | 0.14 ... 2.5 mm2 |
Cable gland | for cable diameter 3 ... 8.5 mm |
Cover fixing | stainless steel socket cap head screws |
| Screws | M6 |
Housing material | Seawater-resistant aluminum |
| Finish | epoxy coated RAL 7005 (grey) |
| Flamepath grease | Greasil MS4 or NEVER SEEZ Marine Grade |
Degree of protection | IP66 |
Mass | 9 kg |
Dimensions | |
| Height | 175 mm |
| Width | 226 mm |
| Length | 303 mm |
Factory settings |
Switching output 1 | -30 ° ... 30 ° |
Switching output 2 | -30 ° ... 30 ° |
Analog output | -45 ° ... 45 ° |
Classifications
System | Classcode |
ECLASS 13.0 | 27271101 |
ECLASS 12.0 | 27271101 |
ECLASS 11.0 | 27271101 |
ECLASS 10.0.1 | 27271101 |
ECLASS 9.0 | 27271190 |
ECLASS 8.0 | 27270790 |
ECLASS 5.1 | 27270790 |
ETIM 9.0 | EC011640 |
ETIM 8.0 | EC003965 |
ETIM 7.0 | EC002544 |
ETIM 6.0 | EC002544 |
ETIM 5.0 | EC002544 |
UNSPSC 12.1 | 41114624 |
Details:
INX360D-F99-I2E2-V15-Ex
Product Documentation:
INX360D-F99-I2E2-V15-Ex
Design / Simulation:
INX360D-F99-I2E2-V15-Ex
Approvals:
INX360D-F99-I2E2-V15-Ex