Support Industrielle sensorer
Support Explosion Protection
Industrielle sensorer

AS-Interface safety module VBA-4E2A1A-KE3-ZEL/E2L/SEL

VBA-4E2A1A-KE3-ZEL/E2L/SEL
  • Safety output module with diagnostic node and I/O node
  • 1 enabling circuit with 2 safe electronic outputs
  • Assigns a complete address and two A/B addresses
  • 1st A/B address: 3 standard inputs and 1 EDM input (I/O node)
  • 2nd A/B address: diagnostics and operational switching of the safe outputs (diagnostic node)
  • Applications up to category 4/PL e/SIL 3

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Hent hele databladet som PDF:


Uddrag af datablad: Tekniske data for   VBA-4E2A1A-KE3-ZEL/E2L/SEL

Produkt beskrivelse
KE3 switch cabinet module, 1 safety-related electronic output, 4 standard inputs, 2 standard outputs
General specifications
Node typeA/B node, standard node
AS-Interface specificationV3.0
Required gateway specification≥ V2.1
Functional safety related parameters
Safety Integrity Level (SIL)SIL 3
Performance level (PL)PL e
Mission Time (TM)20 a
PFHd1.91 E-9
PFD5.94 E-7
Indicators/operating means
LED FAULTerror display; LED red
red: communication error
LED PWRAS-Interface voltage; LED green
LED INswitching state (input); 4 LED yellow
LED OUTFor flashing patterns see diagnostics table
Electrical specifications
Auxiliary voltage (input)24 V ± 20 % PELV
Rated operating voltage26.5 ... 31.6 V from AS-Interface
Rated operating current< 200 mA
Protection classIII
Surge protectionUEXT, Ue: Over voltage category III, safe isolated power supplies (PELV)
Input
Number/Type3 standard inputs, 1 EDM input
Supplyfrom external auxiliary voltage UAUX
Voltage24 V DC
Input currentStatic switching current: 4 mA at 24 V. Dynamic switching current: 15 mA at 24 V (T=100 μs)
Sensor supply≤ 100 mA
Output
Number/Type2 output switch elements
Max contact load: 0.5 A DC-13 at 30 V
1 safe electronic output
Supplyfrom external auxiliary voltage UAUX
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 62026-2:2013 EN 61000-6-2:2005/AC:2005
EN 61000-6-3:2007/A1:2011
Standard conformity
Electromagnetic compatibilityEN 61326-3-1:2008
Degree of protectionEN 60529:2000
Electrical safetyEN ISO 13849-1:2008 EN ISO 13849-2:2012
Emitted interferenceEN 61000-6-3:2007/A1:2011
AS-InterfaceEN 62026-2:2013
Noise immunityEN 61000-6-2:2005/AC:2005 EN 62026-2:2013
Functional safetyIEC 61508:2010 (SIL3) EN 62061:2005
Programming instructions
ProfileDiagnostic node: S-7.A.E, ID1 = 5
Input node: S-7.A.E, ID1 = 7
IO code7
ID codeF
Ambient conditions
Ambient temperature0 ... 55 °C (32 ... 131 °F)
Storage temperature-25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Degree of protectionIP20
Connectionremovable terminals
rated connection capacity:
rigid/flexible (with and without wire-end ferrules): 0.25 mm2 ... 2.5 mm2
for multiple-wire connection with two wires of equal cross-section:
flexible with twin wire-end ferrules: 0.5 mm2 ... 1.5 mm2
Material
HousingPA 66-FR
Dimensions
Height99 mm
Width22.5 mm
Length107 mm
MountingDIN mounting rail

Classifications

SystemClasscode
ECLASS 13.027272603
ECLASS 12.027242604
ECLASS 11.027242604
ECLASS 10.0.127242604
ECLASS 9.027242604
ECLASS 8.027242604
ECLASS 5.127242604
ETIM 9.0EC001599
ETIM 8.0EC001599
ETIM 7.0EC001599
ETIM 6.0EC001599
ETIM 5.0EC001599
UNSPSC 12.139121535

Details: VBA-4E2A1A-KE3-ZEL/E2L/SEL

Product Documentation: VBA-4E2A1A-KE3-ZEL/E2L/SEL

Language Selection:
Brief InstructionsSprogFil typeFil størrelse
Mounting Instruction VBA-4E2A1A-KE3-ZEL/E2L/SEL / Montageanleitung VBA-4E2A1A-KE3-ZEL/E2L/SELALLPDF1394 KB
Safety and Security Documentation
Instruction Manual VBA-4E2A1A-KE3-ZEL/E2L/SEL / Betriebsanleitung VBA-4E2A1A-KE3-ZEL/E2L/SELALLPDF443 KB
Manuals
Manual VBA-4E2A1A-KE3-ZEL/E2L/SELENGPDF3543 KB

Design / Simulation: VBA-4E2A1A-KE3-ZEL/E2L/SEL

Language Selection:
CADSprogFil typeFil størrelse
CAD 3-D / CAD 3-DALLSTP4525 KB
CAD Portal / CAD PortalALLLINK---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data PortalALLLINK---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZALLEDZ1058 KB

Approvals: VBA-4E2A1A-KE3-ZEL/E2L/SEL

Language Selection:
CertificatesCertifikat nr.SprogFil typeFil størrelse
US CA ULE223772ALLLINK---
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-0175EALLPDF220 KB

Software: VBA-4E2A1A-KE3-ZEL/E2L/SEL

Language Selection:
Software ToolsUdgivelses infoFil typeFil størrelse
SISTEMA SLB Library AS-Interface Safety / SISTEMA SLB Library AS-Interface SafetyZIP622 KB

Tilhørende produkter: VBA-4E2A1A-KE3-ZEL/E2L/SEL

Accessories

AS-Interface Handheld with accessoryfa

Adapter cable module/hand-held programming devicefa
25-point wiring link for control cabinet modules with screw terminalsfa
Generelle bemærkninger vedr. produktoplysninger fra Pepperl+Fuchs
AS-Interface Product Range

Get to know our full range of AS-Interface products.

Pepperl+Fuchs A/S
Kirkebjerg Allé 90
DK-2605 Brøndby
Denmark
info@dk.pepperl-fuchs.com
phone +45 7010 4210

© 2024 Alle rettigheder forbeholdt.

Pepperl+Fuchs er markedsledende indenfor udvikling og fabrikation af elektroniske sensorer og komponenter til det globale automatiseringsmarked. Kontinuerlig innovation, kombineret med høj kvalitet og stabil vækst har sikret uafbrudt succes gennem mere end 70 år. Pepperl+Fuchs har 6.300 ansatte på verdensplan og har produktionsfaciliteter i Tyskland, USA, Singapore, Ungarn, Indonesien og Vietnam; de fleste ISO 9001 certificerede.