Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Uddrag af datablad: Tekniske data for
FSM58
Electrical specifications |
Operating voltage | 10 ... 30 V DC |
No-load supply current | max. 140 mA |
Power consumption | ≤ 2.5 W , without output drivers |
Linearity | ± 0.5 LSB |
Output code | Gray code, binary code |
Code course (counting direction) | cw ascending (clockwise rotation, code course ascending) |
Code preparation time | 0.3 ms |
Interface |
Interface type | Push-pull, parallel , short-circuit protected |
Resolution | |
| Multiturn | 25 Bit |
Load current | 20 mA |
Voltage drop | ≤ 2.5 V |
Signal voltage | |
| High | operating voltage minus voltage drop |
| Low | ≤ 2.8 V |
Rise time | 300 ns |
De-energized delay | 300 ns |
Code change frequency | 400 kHz |
Input 1 |
Input type | Selection of counting direction (cw/ccw) |
Signal voltage | |
| High | 10 ... 30 V |
| Low | 0 ... 2 V |
Input current | < 6 mA |
Signal duration | min. 10 ms |
Switch-on delay | ≥ 1 ms |
Switch-off delay | ≥ 1 ms |
Input 2 |
Input type | Temporary storage (LATCH) |
Signal voltage | |
| High | 10 ... 30 V |
| Low | 0 ... 2 V |
Input current | < 6 mA |
Signal duration | min. 100 µs |
Switch-on delay | < 0.1 ms |
Switch-off delay | < 0.1 ms |
Input 3 |
Input type | zero-set (PRESET) |
Signal voltage | |
| High | 10 ... 30 V |
| Low | 0 ... 2 V |
Input current | < 6 mA |
Signal duration | min. 10 ms |
Switch-on delay | < 1 ms |
Connection |
Connector | type 9426, 26-pin |
Cable | ∅9 mm, 15 x 2 x 0.14 mm2, 2 m |
Standard conformity |
Degree of protection | DIN EN 60529, IP65 |
Climatic testing | DIN EN 60068-2-3, no moisture condensation |
Emitted interference | EN 61000-6-4:2007 |
Noise immunity | EN 61000-6-2:2005 |
Shock resistance | DIN EN 60068-2-27, 100 g, 6 ms |
Vibration resistance | DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz |
Approvals and certificates |
UL approval | cULus Listed, General Purpose, Class 2 Power Source |
Ambient conditions |
Operating temperature | -40 ... 85 °C (-40 ... 185 °F) cable models: -30 ... 70 °C (rigid wiring) -5 ... 70 °C (flexible wiring) |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) (cable models: -5 ... 70 °C) |
Mechanical specifications |
Material | |
| Combination 1 | housing: powder coated aluminum flange: aluminum shaft: stainless steel |
| Combination 2 (Inox) | housing: stainless steel flange: stainless steel shaft: stainless steel |
Mass | approx. 400 g (combination 1) approx. 800 g (combination 2) |
Rotational speed | max. 12000 min -1 |
Moment of inertia | 30 gcm2 |
Starting torque | ≤ 5 Ncm |
Classifications
System | Classcode |
ECLASS 13.0 | 27270502 |
ECLASS 12.0 | 27270502 |
ECLASS 11.0 | 27270502 |
ECLASS 10.0.1 | 27270502 |
ECLASS 9.0 | 27270502 |
ECLASS 8.0 | 27270502 |
ECLASS 5.1 | 27270502 |
ETIM 9.0 | EC001486 |
ETIM 8.0 | EC001486 |
ETIM 7.0 | EC001486 |
ETIM 6.0 | EC001486 |
ETIM 5.0 | EC001486 |
UNSPSC 12.1 | 39121527 |
Details:
FSM58
Approvals+Certificates:
FSM58
Certificates | Fil type | Fil størrelse |
US CA UL | PDF | 280 KB
|
Tilhørende produkter:
FSM58
Accessories |
|
|
|
Socket, Straight, 26-pinfa |
|
|
|
|
Accessory kit for ∅58 absolute rotary encoder with recessed hollow shaft 15 mmfa |
|
|
|
|
Accessories set for ∅58 absolute rotary encoder with recessed hollow shaft 14 mmfa |
|
|
|
|
Accessories set for ∅58 absolute rotary encoder with recessed hollow shaft 12 mmfa |
|
|
|
|
Accessory kit for ∅58 absolute rotary encoder with recessed hollow shaft 10 mmfa |
|